Classroom Stopwatch
A free online stopwatch for the projector. Press Start or the Space bar to count up in tenths of a second, record laps with the L key and copy the lap list into a spreadsheet.
Keys: Space start/stop · L lap · R reset
How to Use the Classroom Stopwatch
To use the classroom stopwatch above, press Start or the Space bar to count up, press Lap to record each split, and press Stop to freeze the time. At Chalkbox, we build free classroom tools, and this online stopwatch runs in the browser with no account and nothing to install.
- Start. Press the Start button or the Space bar. The display counts up from 00:00.0, and the Start button changes to Stop.
- Record a lap. Press Lap or the L key while the time is running. Each press adds a row to the lap list. The Lap button only works while the stopwatch runs.
- Stop. Press Stop or the Space bar to freeze the time on the screen.
- Continue. Press Start again to keep counting from the frozen time. The stopwatch does not restart from zero, so you can pause for a question and pick up where the class left off.
- Reset. Press Reset or the R key. The display goes back to 00:00.0 and the lap list clears.
- Go fullscreen. Press Fullscreen to fill the screen with the time and the buttons for the projector. Press Esc to leave fullscreen.
The display shows minutes, seconds and tenths of a second in the form mm:ss.t. A reading of 01:23.0 means 1 minute, 23 seconds and 0 tenths. After 59:59.9, an hours digit appears and the display switches to h:mm:ss.t.
The Space bar, L and R are ignored while the cursor is in a text box. Click an empty part of the page first, then use the keyboard.
Laps and Splits on the Online Stopwatch
Each lap on the online stopwatch adds a row with three numbers: the lap number, the lap time and the total time. The lap time is the time since the previous lap, or the time since the start for lap 1. The total is what the main display read when you pressed Lap, and the newest lap always sits at the top of the list.
Take a relay with three runners as an example. You press Lap as each runner finishes, at totals of 0:42.1, 1:23.0 and 2:01.6. The stopwatch finds each lap time by subtracting the previous total from the new one.
| Lap | Total when Lap was pressed | Subtraction | Lap time |
|---|---|---|---|
| 1 | 0:42.1 | 0:42.1 minus 0:00.0 | 0:42.1 |
| 2 | 1:23.0 | 1:23.0 minus 0:42.1 | 0:40.9 |
| 3 | 2:01.6 | 2:01.6 minus 1:23.0 | 0:38.6 |
Add the lap times to check the table: 0:42.1 + 0:40.9 + 0:38.6 = 2:01.6, the final total. The lap column gives each runner's own time, so the class can see that the third runner was fastest at 0:38.6. On the screen, lap 3 shows first because the newest lap is at the top.
Copy Laps into a Spreadsheet
The "Copy laps" button copies the whole lap list as plain text, one line per lap, with the lap number, the lap time and the total. For the relay above, lap 2 copies as Lap 2 0:40.9 1:23.0. Paste the text into a spreadsheet or a document to keep a record of the race or the trial.
Copy the laps before you close or reload the page. The stopwatch saves nothing, so a reload clears the time and every lap.
Classroom Uses for a Stopwatch with Laps
A classroom stopwatch suits any activity where you want to find out how long it takes. Each idea below uses only the Start, Lap, Stop, Reset and Copy laps buttons.
- Beat the transition record. Press Start when you ask the class to switch activities, and press Stop when the last student is ready. Write the time on the board, then challenge the class to beat their own record next time. To watch the volume while students move, open the noise meter in a second tab.
- Time a fluency read. Press Start as a student begins the passage and Stop at the last word. Write the time beside the student's name right away, because the page keeps nothing once it closes.
- Repeat a science trial three times. Run trial 1, press Stop, write the time in the data table and press Reset. Do the same for trials 2 and 3. If the trials run back to back with no gap, press Lap at the end of each one instead, and the lap column gives you each trial time.
- Run a relay in physical education (PE) or at recess. Press Start at "go", press L as each runner tags the next, and press Stop at the finish. Copy the laps to keep each runner's time, and keep team points on the classroom scoreboard.
- Time a math fact drill. Press Start as students turn over the sheet. Press Lap each time a student hands in a sheet, and the Total column gives every finish time, with the newest lap at the top. Note the names in the same order on a class list.
Projecting the Classroom Stopwatch While You Teach
Press Fullscreen and the time and buttons fill the screen, so the class can watch the count on the projector. Press Esc when you want the normal page back.
The keyboard lets you run the stopwatch from the laptop without reaching for the mouse:
- Space starts and stops the time.
- L records a lap.
- R resets the time and clears the laps.
The running time also shows in the browser tab title. If you switch to a slide or a document in another tab, you can still read the time in the tab bar. The stopwatch keeps counting while its tab is in the background, and the display catches up when you come back.
For station rotations, open the station rotation timer instead.
Stopwatch or Countdown Timer
Use the classroom stopwatch when you do not know how long something will take, and use the classroom timer when you set the time limit before you start. The stopwatch counts up and stays silent. The timer counts down and plays a chime at the end.
| Classroom stopwatch | Classroom timer | |
|---|---|---|
| Direction | Counts up from 00:00.0 | Counts down |
| Sound at the end | None | A chime |
| Pick it when | You want to find out how long something takes | You decide the limit before you start |
| Verdict | Measure transitions, reads, trials and relays | Give a set amount of time with a signal at the end |
Choose the stopwatch when the time itself is the result you want to write down, such as a fluency read or a relay split. Choose the timer when students need to hear that time is up, because the stopwatch has no sound or alarm. For a short think time before students answer, the 30 second timer fits.
Our recommendation flips as soon as you know the length in advance. At that point use a countdown with a chime.
Accuracy and Limits of the Classroom Stopwatch
The classroom stopwatch works from the computer's clock. It compares the start time with the current time, so it keeps correct time when the tab is in the background or the screen is busy. In our own check of this stopwatch in a browser, a 3-second interval measured by the stopwatch matched the computer's clock to within a tenth of a second.
The display shows tenths, so a tenth of a second is the smallest step you will see on the screen.
The stopwatch has four limits, and each one has a simple workaround:
- Nothing is saved. Closing or reloading the page clears the time and the laps. Press Copy laps and paste the list into a document before you close the tab.
- No sound or alarm. The stopwatch is silent. Read the time aloud when you stop it, or switch to the classroom timer when you need a chime.
- No countdown. The display only counts up. Use the classroom timer for a countdown.
- Keys in text boxes. Space, L and R do nothing while the cursor is in a text box. Click outside the box first.
Nothing is sent to a server.
Use the classroom stopwatch if you want to measure how long a transition, a fluency read, a science trial or a relay takes, and copy the laps before you close the page. If you already know the limit and want students to hear when it ends, use the classroom timer instead. To start, press Fullscreen, then press the Space bar on the classroom stopwatch above.
Join the Chalkbox list for free printable packs and new tools — no spam, unsubscribe anytime.
Frequently asked questions
Is an online stopwatch accurate?
Yes, the Chalkbox classroom stopwatch keeps counting correctly. It works from the computer's clock by comparing the start time with the current time. In our own check of this stopwatch in a browser, a 3-second interval measured by the stopwatch matched the computer's clock to within a tenth of a second. A tenth is the smallest step the display shows.
Does the stopwatch keep running if I switch tabs?
Yes. The stopwatch keeps counting correctly while its tab is in the background or the screen is busy, because it works from the computer's clock. The display catches up when you come back. The running time also shows in the browser tab title, so you can read it from another tab.
Can I copy the lap times?
Yes. Press "Copy laps" and the stopwatch copies the lap list as plain text, one line per lap, with the lap number, the lap time and the total time, e.g. "Lap 2 0:40.9 1:23.0". Paste the text into a spreadsheet or a document.
Does the stopwatch save my laps?
No. Closing or reloading the page clears the time and the laps, and nothing is sent to a server. Press "Copy laps" and paste the list into a document or spreadsheet before you close the tab.
Can the stopwatch count down?
No. The stopwatch only counts up from 00:00.0, and it does not play a sound or set an alarm. For a countdown with a chime at the end, use the Chalkbox classroom timer.