30 Second Timer
A free 30 second timer for the projector. It opens at 00:30, so you press Start, and at zero it shows “Time’s up!” and plays a chime.
How to Use the 30 Second Timer
To set a timer for 30 seconds, press Start, because the 30 second timer above opens at 00:30 with nothing to type first. At Chalkbox, we build free classroom tools, and this one runs in the browser with no account and nothing to install.
- Check the display. It reads 00:30 when the page opens.
- Press Start. The countdown begins, and the Start button changes to "Pause" while it runs.
- Press Fullscreen for the projector. The running countdown fills the screen. The buttons stay on the page, so press Esc when you need to pause or reset.
- Press Pause to hold the count. Use it if you need to stop the round partway through.
- Watch for zero. The display reads "Time's up!" and flashes. With sound on, a three-note chime plays.
- Press Reset for the next round. Reset stops the timer and puts the display back at 00:30.
In our own check of the 30 second timer in a browser, the timer opened at 00:30, counted down to "Time's up!", and Reset returned it to 00:30. If you change the length, Reset goes back to the length you set.
The time left also shows in the browser tab title while the countdown runs. If you switch to a slide or a document mid-round, look at the tab to see how many seconds remain. The timer works in a phone or tablet browser too, so you can run the 30 second countdown from a device in your hand.
Classroom Routines for a 30 Second Timer
Thirty seconds fits one short job: one question to think about, one quick exchange with a partner, or one move from place to place. Pick one of the ideas below and tell the class what the chime means before you press Start.
- Think time before hands go up. Ask the question, press Start, and tell students to keep hands down until the chime. Every student gets the same 30 seconds to form an answer before anyone speaks.
- A quick turn-and-talk. Give one narrow prompt, such as "Tell your partner one word that describes the setting." Keep the prompt to a single sentence so both partners can answer before the display reads "Time's up!"
- A transition to the carpet. Press Start as you give the direction. Students put materials down and move to the carpet before the countdown reaches zero.
- A clean-up countdown. Name one task, such as caps on markers or papers in the tray. The shrinking bar shows students how much time is left without anyone asking.
- A one-question brain break. Ask one light question, such as "Would you rather fly or be invisible?", and let partners answer before the chime. For longer breaks, use the ideas on the brain breaks page.
Press Reset between rounds so the display shows 00:30 again before the next prompt. For more routines, see classroom management strategies.
Setting 45 or 90 Seconds Instead
You can change the length with the "Custom min" and "sec" boxes, or with the preset buttons for longer blocks. Lengths run from 1 second to 180 minutes, and the "sec" box takes 0 to 59 seconds.
Take 90 seconds as a worked example. Enter 1 in "Custom min" and 30 in "sec", and the timer runs for 1 × 60 + 30 = 90 seconds. Decimal minutes also count as seconds, so 0.5 in "Custom min" becomes 0:30, and 1.5 gives the same 90 seconds.
| Length you want | Custom min | sec | Decimal minutes instead |
|---|---|---|---|
| 30 seconds | 0 | 30 | 0.5 |
| 45 seconds | 0 | 45 | 0.75 |
| 60 seconds | 1 | 0 | 1 (or the 1m preset) |
| 90 seconds | 1 | 30 | 1.5 |
The preset buttons set 1m, 2m, 5m, 10m, 15m and 20m with one press. Once you set a new length, Reset returns the display to that length until you change it again. To get back to 30 seconds, enter 0 in "Custom min" and 30 in "sec", or type 0.5.
Chalkbox also has a 5 minute timer and a 10 minute timer for longer work blocks. If groups move between stations, use the station rotation timer.
Sound, Music and the Shrinking Bar
The 30 second timer gives the class three signals: a shaded bar that shrinks, a chime at zero and optional calm music during the count. You can turn the sound signals on or off to suit the room.
- The shrinking bar. A shaded bar inside the display shrinks as the time runs down.
- The chime. The "Sound on/off" button controls the three-note chime that plays at zero.
- Calm music. Press "Calm music" for a soft melody generated in the browser while the countdown runs. The music stops when you pause, when you reset and when the timer reaches zero.
For a quiet round, turn sound off. There is no chime at zero, but the display still reads "Time's up!" and flashes, so students who are watching the screen know the round is over. If the computer's reduce-motion setting is on, the display does not flash, and the "Time's up!" text is the signal.
30 Second Countdown or Stopwatch
Use the 30 second timer when you already know how long the activity should last, and use the classroom stopwatch when you want to time how long something takes. The 30 second timer counts down only.
Think time is a countdown job, because you decide the 30 seconds before you start. Lining up is a stopwatch job the first time, because you want to find out how long the class takes. If the stopwatch shows the line-up took 45 seconds, enter 0 min 45 sec here and count down from that length next time.
Chalkbox also has a general classroom timer.
What the 30 Second Timer Does Not Do
The 30 second timer counts down from the length you set, and it does not count up, save rounds or repeat on its own. Each limit has a simple fix:
- Counting up. The timer counts down only. To measure how long a task takes, use the stopwatch page linked above.
- Saving rounds. Nothing is saved, so the timer keeps no record of how many rounds you ran. Keep a tally on the whiteboard if you need one.
- Repeating. There is no repeat mode. When a round ends, press Reset and then Start for the next 30 seconds.
Thirty seconds fits one prompt or a quick switch between activities. For longer partner talk, set 1 min for 60 seconds or 1 min 30 sec for 90. To start, press Start and then Fullscreen on the 30 second timer above.
Join the Chalkbox list for free printable packs and new tools — no spam, unsubscribe anytime.
Frequently asked questions
Can you set a timer for 30 seconds?
Yes. The Chalkbox 30 second timer opens at 00:30, so you press Start and it counts down to zero. When the display reads "Time's up!", press Reset to put it back at 00:30 for the next round. It is free, needs no account and runs in the browser.
Does the 30 second timer make a sound at the end?
Yes, when sound is on. At zero, a three-note chime plays, and the display reads "Time's up!" and flashes. Press "Sound on/off" for a silent round, and the display still shows "Time's up!" at zero. If the computer's reduce-motion setting is on, the display does not flash.
Can I set 90 seconds instead?
Yes. Enter 1 in the "Custom min" box and 30 in the "sec" box, or type 1.5 in "Custom min", because decimal minutes count as seconds. Both give 90 seconds (1.5 × 60 = 90). After that, Reset returns the display to 90 seconds instead of 30.
Can I show the timer fullscreen on the projector?
Yes. Press Start first, then Fullscreen, and the countdown fills the screen with the shaded bar shrinking as the seconds run down. The buttons stay on the page, so press Esc to pause or reset.
Does the timer work on a phone?
Yes. The 30 second timer works in a phone or tablet browser. On a computer, the time left also shows in the browser tab title while the countdown runs.