Classroom Poll

A free online poll that you count by hand. Tap an option once for each student who votes, and the bars and percentages update on the projector. It runs on one screen with no sign-up.

Edit the options

Which book should we read next?

0 votes counted

To run the classroom poll above, type your question, set 2 to 6 options and project the page. Then tap an option once for every student who raises a hand for it, and the bars and percentages update as you count.

At Chalkbox, we build free classroom tools, and this class poll opens in a browser with no account and nothing to install. It runs in the browser on one device, and you do the counting.

How to Run a Class Poll

A class poll on this page takes six steps, from typing the question to reading the winner off the bars.

  1. Type the question. The poll question box holds up to 140 characters. It starts with "Which book should we read next?", so a book vote needs no typing at all.
  2. Set the number of options. Use the "Options" number box to pick 2 to 6. The poll starts with 3, named Option A, Option B and Option C.
  3. Name the options. Open "Edit the options" and give each one a name of up to 40 characters, such as a book title or a game.
  4. Press Fullscreen. The question and the bars fill the screen for projecting.
  5. Count the votes. Read each option aloud and tap its big colored "+1" button once for every hand that goes up. Each tap adds one vote, and that option's bar grows.
  6. Read the result. Each bar shows its vote count and its share of all votes. The leading option's bar is drawn darker, and the line under the bars reads "N votes counted".

If you tap the wrong button, press "Undo last vote" to remove the most recent vote you added. Press "Clear votes" to set every count back to zero while keeping the question and options for a re-vote.

A Worked Example with 24 Students

Say 24 students vote on the next read-aloud book with three options. You tap Option A 11 times, Option B 8 times and Option C 5 times, and the line under the bars reads "24 votes counted".

Each percentage is the option's count divided by the total, rounded to a whole number:

OptionVotesMathBar shows
Option A1111 ÷ 24 = 45.846%
Option B88 ÷ 24 = 33.333%
Option C55 ÷ 24 = 20.821%

Option A wins, and its bar is the darker one. The poll gives any point left over by rounding to the share that was closest to rounding up, so the bars always add to 100%, and three single votes show 34%, 33% and 33%.

Voting Methods for a One-Screen Classroom Poll

Every vote in this classroom poll is a tap on the one screen, made by you or by a student who walks up to it. Four methods fit a poll counted on one device:

  • Eyes-closed hand raise. Students close their eyes or put their heads down, and you call each option in turn. Tap that option once for each hand you count.
  • A show of fingers. Number the options on the board, and students hold up one finger for Option A, two for Option B and so on. Everyone votes at the same moment, and you tap once per student for each number you count.
  • A student comes up to tap. Students walk to the board one at a time and press the "+1" button on their own choice. Turn on hidden results first, so each student sees "?" in place of the counts left by the students before.
  • A paper ballot. Students write their choice on a slip and fold it. Read each slip aloud, or sort the slips into piles, and tap the matching option once per slip.

When to Hide the Results

Tick "Hide results until I reveal them" when you want students to commit before they see the class's choice. The bars show "?" and no per-option counts or percentages until you press "Reveal results", and "Hide results" covers them again.

Hide results for checks of understanding, for votes where students tap the screen themselves, and for any vote where one loud early choice could sway the room. Leave them showing for low-stakes votes.

Give students a set amount of thinking time before you call the options. The classroom timer in a second tab can give students a set thinking time before voting starts.

Poll Questions for Students

A poll for students reads best when every option fits comfortably in its 40-character name and can be read from the back row. These examples cover four kinds of class vote:

  • Class decisions. "Which book should we read next?" with three titles. "Which game for Friday afternoon?" with two to four games. "Which class reward should we work toward?" with only the rewards you are willing to give.
  • Opinion and debate warm-ups. "Should recess be longer than lunch?" with Agree, Disagree and Not sure. After the reveal, ask one student from each side to explain their vote.
  • Checks of understanding. "What is 3/4 of 12?" with the options 6, 8, 9 and 12. Hide results first, then reveal and talk through why 9 is correct.
  • Tie-breakers. Re-run a tied vote with only the tied options, as the next section sets out.

For more prompts with two clear sides, the this or that questions list turns straight into two-option polls. A quick opinion vote also makes a start-of-day routine, and the morning meeting ideas page has more ways to open the day.

When students stand in a corner for their choice, as in the four corners game, set the poll to four options. Count each corner and tap that option once per student, so the bars show the whole class the split.

Handling a Tie or a Vote That Matters

Decide before you poll whether the class vote is binding or advisory, and tell the class which one it is. A binding vote means the winning option happens. An advisory vote means you will weigh the result alongside time, cost or what the unit needs.

If there is any chance you will overrule the result, call the vote advisory before anyone raises a hand.

Plan your tie rule before the vote too. With 2 options and 24 voters, a 12-to-12 split is possible, so have one of these ready:

  1. Re-vote on the tied options only. Set the "Options" number box to 2, rename the two options to the tied choices and press "Clear votes". Changing the number of options resets the undo history, so make the change before you start counting.
  2. Use a name-picker tiebreak. If the re-vote ties again, open the random name picker and let the selected student choose between the tied options.

Whichever rule you pick, announce it with the question.

Keeping Classroom Voting Fair and Kind

Fair student voting rests on one vote per student, no pressure to vote a certain way and a calm reveal.

  • One vote per student. The poll counts one tap as one vote and cannot stop a student voting twice. Before you reveal, compare the "N votes counted" line with the number of students present. If the total is higher, press "Clear votes" and run the vote again.
  • No pressure. Use eyes closed or paper ballots for votes where students might follow a friend. Add a "Not sure" option, or tell students before you start that they may sit out a vote they have no view on.
  • Hide results first. Reveal everything at once after the last vote is counted, so no student watches their choice fall behind mid-count.
  • Look after the losing side. Thank the class for voting, then name the runner-up out loud and say when it can come back, such as the runner-up book going first on the next vote.

If the total is lower than the number present, ask who has not voted yet and count those hands before you reveal.

What the Classroom Poll Does Not Do

The classroom poll is a teacher-counted tool on one device, and five limits shape how you plan a vote around it.

  • No student devices. Students do not vote from their own phones or laptops, and there are no join codes. Every vote goes in through your tap or a student's tap on the one screen.
  • Not anonymous to you. The poll cannot tell who voted, but in a hand raise you see each hand. For a vote students should keep private from you, use folded paper ballots and tally them yourself.
  • No record of past polls. The question, options and counts save in this browser on this device, so they are there if you close and reopen the tab. Once you edit the question and clear votes, the earlier result is gone, so write it down first. Clearing browser data or using private browsing also removes the saved poll, and nothing is sent to a server.
  • One kind of vote. There is no ranked-choice or multiple-answer voting, no word clouds and no open-text answers. For a ranked decision, run a first vote, drop the last-place option and vote again.
  • No polling widget on the dashboard. The classroom dashboard puts a timer, name picker and scoreboard on one screen, with no polling widget. Open this poll in a second tab beside it.

This poll is the wrong tool if every student needs to answer from their own device, or if you need written answers. For that kind of vote, you need a separate student-device polling product. If your vote can run on hands, fingers or paper slips, the classroom poll handles it from one screen.

To start, type your question, set your options and press Fullscreen on the classroom poll above.

Get the printable pack

Join the Chalkbox list for free printable packs and new tools — no spam, unsubscribe anytime.

Frequently asked questions

How do I run a quick poll in my classroom?

Type your question in the poll question box, set 2 to 6 options with the "Options" number box and press Fullscreen. Call each option aloud and tap its "+1" button once for every student who raises a hand. Each bar shows that option's count and percentage, and the leading option's bar is drawn darker.

Can students vote from their own phones or laptops?

No. The classroom poll is counted by the teacher on one device, and there are no join codes. Students vote by raising a hand, holding up fingers, walking up to tap, or writing a paper ballot that you tally. If each student needs to vote on their own device, you need a separate student-device polling product.

Can I hide the results until everyone has voted?

Yes. Tick "Hide results until I reveal them" before the vote. The bars show "?" and no per-option counts or percentages until you press "Reveal results", and "Hide results" covers them again. Keep tapping votes in as normal while the results are hidden.

Is the voting anonymous?

Partly. The poll counts one tap as one vote and cannot tell who voted. In a hand raise you see each student's hand, and classmates can see it too unless their eyes are closed. For a vote that stays private from you as well, use folded paper ballots and tally them yourself.

Does the poll save my results?

It saves the current poll only. The question, options and counts stay in this browser on this device if you close and reopen the tab, and nothing is sent to a server. Clearing browser data or using private browsing removes them. Once you edit the question and clear votes, the earlier result is gone, so write each result down first.